DOCK HOUSE

The Dock House is a a complete loading bay that can be added on the outside of an opening. It is assembled by bolts, without weldings that are only necessary to fix it against the building, where a steel profile is required. (ref. dwg IR000-540). Complete with two front legs, adjustable in height from 800 to 1270 mm and from 1271 to 1500 mm. Manufactured with sendzimir galvanized profiles, collapsable, bolted, the transport costs are minimized. Once installed the steel dock, the mounting follows by installing the sides, the roof, the dock shelter and the sectional door.
Easy to move in case of future necessity, this is the solution for those who cannot do maçonnery works
The functioning of the dock levellers is described at dock leveller swivelling lip or dock leveller telescopic lip
The functioning of the sectional door is described at sectional doors

The composition of the Dock House can vary by a lot, to follow the specific requirements, allowing to configurate the thickness of the walls, the thickness of the roof, the thickness of the sectional door, the presence and thicknes of the insulating panel at the end of the dock leveller pit, the addition of adaptation to different degrees of connection to the building, etc.
For all these options refer to the Code section
For the options of the levellers see dock levellers with swiveling lip (link) or dock levellers with telescopic lip
See sectional doors

Dock levellers built in conformity to the product Norm EN 1398. Complete with CE marking

The standard nominal load of the dock levellers is of 6.000 kg (10.000 kg uniformly distributed, but this is not the scope of the dock levellers), optional 9.000 kg (15.000 kg uniformly distributed).

Click here for identifying the product code and its dimensional characteristics.

Tension 230-400 V three phased
Power 0,75 kW or 1,1 kW
Frequency 50/60 Hz