SWING AND TELESCOPIC LIP CASTLE DOCK LEVELLERS
Dock levellers in one piece, inclusive of the powerpack, compact frame. 550 mm high pack, complete with accessories. It is the traditional system of installation of the levellers into the pit, with the simplest installation system.
Also the CASTLE dock leveller is nothing else than a “ready suit” for the characteristics of the functioning of the swing lip dock leveller (ipertest) or telescopic lip dock leveller (ipertest)
The Castle dock leveller is a dock leveller with swivelling or telescopic lip, mounted onto a “CASTLE” frame, ready to be laid on the bottom of a traditional pit. The pit has to be made following the specific drawings on the technical sheet, with the steel parts well anchored into the concrete.
The installation requires few weldings and few expansion bolts.
The CASTLE Campisa leveller is only 550 mm tall. This allows to ship more levellers on a truck with important freight savings.
The CASTLE structure is made with zinced and paint elements.
The hydraulic and electric system (in case of powerpack into the pit) are realized and tested at the workshop. When installing, the activation time is very reduced.
The installation of a CASTLE Campisa leveller is simply made by welding the three head hangings and of the front bar, and some expansion bolts for the lift cylinder flange
The CASTLE levellers are supplied with a lifting tool adapt for a crane and for a fork lift.
Dock levellers built in conformity to the product Norm EN 1398.
Complete with CE marking
In conformity to the provisions of the Norm EN 1398 the levellers have:
- automatic safety valve on the descent of the levellers, in case of accidental departure of the vehicle
- blocking electro valve commanded by the door switch
- foot guards both sides
- maximum pressure valve
- ant-slippery and self-draining surface almond sheet
- minimum 25 mm horizontal or vertical between lip and rest bar
- positive blocking system for maintenance
- and-wind head hinge, smooth in all the inclinations
View the catalogue to identify the product code and its dimensional characteristics.
The leveller require feeding 230/400 V threephased, 50/60 Hz.
DOWNLOAD LOADING BAYS CATALOGUE
REQUEST QUOTE FOR CAMPISA’S PRODUCTS
SEE OTHER PRODUCTS OF THE SECTION DOCK LEVELLERS
The new Universal Dock Leveler can replace several models, making it suitable for different applications. Entirely made of Structural Steel S355.
Electrohydraulic dock leveller with swivelling lip, strong and lasting, it allows to load the vehicles…
Dock levellers in one piece, inclusive of the powerpack, compact frame. 550 mm high pack, complete with…
Electrohydraulic dock leveller with telescopic lip, strong and lasting, it allows to load the vehicles…
The CampisaCast dock levellers represents the simplest solution for building a loading bay: there is…
The dock leveller is installed into pits made on drawing, that require protection for the rims. The frame…
The prefabricated pits (formwork to lose) substitute the pit-rim-frame and allow a simple and quick construction…