MINILINKER DOCK LEVELLERS

Home » LOADING BAYS » DOCK LEVELLERS » MINILINKER DOCK LEVELLERS
MINILINKER DOCK LEVELLERS

MINILINKER DOCK LEVELLERS

Manual dock levellers, counterbalanced with a gas-spring or hydraulically powered, that allow to solve economically and effectively the problem of the connection to vehicles with the same level than the truck bed.

Easy and quick to be installed into the pit or on the dock rim, Minilinker dock levelers are manoeuvred by hand (balanced by a gas-spring) or hydraulically by one only operator. In case of hand manoeuvre it is sufficient to fit the lever (1) into the operation hole and pull the lever for opening the lip. Then, by the lever, the leveller is laid onto the truck bed.

During the loading the leveller fluctuates in vertical with the movements of the vehicle. At loading end, by the help of the lever, the dock leveller is taken to retract the lip and return to rest position.

In case of hydraulic powering the above operations are made by depressing a one-button command and the functioning is the same of the swing lip dock levellers.

Possibility of connection to truck beds with a difference of height with the dock level of +- 100mm

CONSTRUCTION

Platform: almond sheet, ant-slippery, 4+2 mm
Lip: almond sheet, ant-slippery, 8+2 mm
Total length : 760 mm
Lip length: 360 mm

FINISHING

Leveller and bumpers blocks grey RAL 7005 colour. Two coats of epoxy-paint two components, oven dried. The catalyzed paint is the most resisting to the fork lift transit.

INSTALLATION

On the pit rim or into the pit

FUNCTIONING

Manual with the aid of a bar, helped by a gas-spring balancing to remain within the EN 1398 efforts. Powered electro hydraulically with electric command on the wall. Electro hydraulic power pack 230/400V three phased, 50 Hz and be placed below the leveller

MEGA BUMPERS

Possibility to install Mega Bumpers:

– installation at dock rim, 250 x 110 x 450 (width x depth x h). Installed on steel support 250 x 430 x 450 mm = total depth 540 mm
– installation in pit: 250 x 500 x 450 (width x depth. x h). Protruded from dock rim per 110 mm

Front protection plate of zinced steel: to be mounted onto the Mega Bumpers for protection of their surface Hydraulic powering, double cylinder and powerpack for easy manouvering

Dock levellers built in conformity to the product Norm EN 1398.
Complete with CE marking

For electro hydraulic operated levellers only:
Tension 230-400 V three phased
Power 0,75 kW or 1,1 kW
Frequency 50/60 Hz

DOWNLOAD LOADING BAYS CATALOGUE

DOWNLOAD

REQUEST QUOTE FOR CAMPISA’S PRODUCTS

CONTACT US

SEE OTHER PRODUCTS OF THE SECTION DOCK LEVELLERS

swing lip dock leveller

Swivelling lip dock: installation with accessories

Electrohydraulic dock leveller with swivelling lip, strong and lasting, it allows to load the vehicles…

suspended dock leveller campisa

Suspended dock levellers with swivelling and telescopic tip

Dock levellers in one piece, inclusive of the powerpack, compact frame. 550 mm high pack, complete with…

swing and telescopic lip dock leveler

Swivelling and telescopic lip castle dock levellers

Dock levellers in one piece, inclusive of the powerpack, compact frame. 550 mm high pack, complete with…

dock levellers

Telescopic lip dock leveller

Electrohydraulic dock leveller with telescopic lip, strong and lasting, it allows to load the vehicles…

CampisaCast dock levellers

The CampisaCast dock levellers represents the simplest solution for building a loading bay: there is…

traditional pit dock levellers

Traditional pits fitting systems

The dock leveller is installed into pits made on drawing, that require protection for the rims. The frame…

prefabricated pit loading dock

Prefabricated pits and loaging docks

The prefabricated pits (formwork to lose) substitute the pit-rim-frame and allow a simple and quick construction…