PLATFORM PROTECTED BY A PVC FILM
All CampisaCast are delivered with a PVC film sticked onto the top platform, until the side frames, and into the between, polystyrene sheets are introduced in order to keep the distance between platform and pit-sides. The top PVC sheet preserves the dock leveller from the aggressive components of the wet trades. Once the wet trades are finished, the PVC sheet is detached and deserted. The dock leveller remains perfect.
ANCHORS FOR THE BUMPERS
The front assembly that closes the leveller CampisaCast has a special system for fixing the bumpers, each bolt of the bumper will be strongly blocked because a threatened bolt results fixed and anchored inside the pouring. The standard product foresees the Standard bumpers, dimensions 60x350x 120 mm deep from dock rim, fixing by 3 bolts M12.
The whole structure in contact with the cement is of sendzimir coated sheet and grants a long lasting also if in bed weather conditions.
The hydraulic and the electric systems (when with power pack into the pit) are realized and tested at the workshop. At the installation moment the installation times are very reduced.
The CampisaCast has special anchors on the backside studied, by experience, for long lasting also with all the effords transmitted to the head hangings that connect the platform to the dock. A patented “ant-nail” system that grants against the hooking of the perimeter side sheets complete the peculiarities of this dock leveller.
The CampisaCast levellers are supplied with a lifting tool adapt for a crane and for a fork lift.