VEHICLE WHEELS GUIDES
Hot dip galvanized steel pipes, for centering the wheels of the backing vehicles.
Realized of hot dip galvanized steel, with pipes diam. 160 mm, 1800 mm long
The round pipe does not affect the wheels and does not reach the rims of the wheel.
They are installed on the front of the loading bay as to guide the external part of the wheels for a perfect centering of the vehicle against the loading bay (tolerance 10 cm) and safeguard the tools.
The distance of installation from the loading bays depends from the type of docking vehicles.
INSTALLATION WITH EXPANSION BOLTS
The installation with expansion bolts is only possible in case of a solid cement pavement.
25-30 cm of pavement are normally sufficient for a good fixation of the guides with 8 dowels per guide. See dwg IR000081-A
INSTALLATION WITH ANCHOR BOLTS
In case of new courts, or with self-blocking systems, or with asphalt, the installation with bolt anchors is necessary, that have to be fit into plinths. A jig is available for the exact piositioning od the plinths.
Click here to identifying the product code and the dimensions
REQUEST QUOTE FOR CAMPISA’S PRODUCTS
SEE OTHER PRODUCTS OF THE SECTION ACCESSORIES
LED flood tecnology, low consumption, for high safety in loading the vehicles
Numbering for the outside and inside, with colors at choice. Support of rigid acrylic material, of formed…
Bollards of protection of the guides of the sectional doors. Sturdy elements, fixed to ground by expansion…
Protections to be fixed to ground by expansion bolts, for the protection of the Consolles and obtain…